| COMPLETE
WILESCO
WORKSHOP - |
|
Click to enlarge
|
A
complete 3 machine tool workshop mounted on a base plate. Using the
drive shaft, a single steam engine can power all three tools at once
demonstrating the use of steam power in the early industrial age. |
|
Consisting of drilling machine M51, two-wheel grinder M52,
circular saw M53 and a countershaft mounted on a base plate. Size: 27cm x 21cm x 13cm.
If purchased separately the three tools and the drive shaft would cost
$200. Save
$$ $ by
buying this complete workshop plus they are mounted on an attractive
base plate.
|
WILESCO
DYNAMOS GENERATE ELECTRICITY
|
Click to
enlarge |
DYNAMO M66
Demonstrating the transformation of energy into electric power, bulb
1.5 volts. The dynamo requires a steamengine with a slide valve, it cannot
be operated by engines: D 5 - D 6 - D 8 - D 12.
Approximate Size:
10x4 x 8cm
|
Click to
enlarge |
DYNAMO WITH STREET
LAMP
Demonstrating the transformation of energy into electric power by
lighting a street lamp ( bulb 1.5 volts). The dynamo requires a steam engine
with a slide valve, it cannot be operated by engines: D 5 - D 6 - D
8 - D 12. Approximate
Size:
20 x 12 x 5cm
Regular Price $66
|
| WILESCO
DRIVE SHAFT |
Click to
enlarge |
ANGLED DRIVE SHAFT
POWER TRANSMISSION
L-shaped countershaft containing four die-cast bearing supports and
seven grooved pulleys with adjustable set screws. Ideal accessory to use to
provide power to up to 6 accessories from one steam engine. Approximate Size:
20x16 x 7cm
Our Sale Price: $64.99
|
| back
to top |
| WILESCO
CARNIVAL RIDES |
| These
brightly colored lithographed tin antique toy replicas of spinning
carnival rides can be powered by the SHOWMAN'S Tractor or any stationary
steam engine. |
|
Click to
enlarge
|
FERRIS WHEEL
Approximate size:23 x 16 x 22cm
Our Sale Price: $99.99
|
|
Click to
enlarge
|
ROUNDABOUT
Approximate size:13 x 13 x 19cm
Regular Price
$60
Our Sale Price: $64.99
|
| back
to top |
| WILESCO
CRAFTSMAN SERIES |
| These
brightly colored lithographed tin antique toy replicas of figures
operating machines are approximately 4'' tall. They can be powered
by any steam engine with a power take off pulley. |
Click to
enlarge |
CARPENTER M76
Worker with a frame saw at his workbench. Finally painted and printed sheet
metal. Approximate Size:
11 x 11 x 7cm
Our Sale Price: $43.99
|
Click to
enlarge |
SHEARS GRINDER M74
Watch the sparks will fly when
the workman is grinding his shears. Finely painted and printed sheet metal.
Approximate Size: 11 x 11
x 7cm
Our Sale Price: $43.99
|
Click to
enlarge |
PRESS OPERATOR M75
Workman operates stamping
press. Finely painted and printed sheet metal. Approximate
Size: 17.5 x 7.5 x 6cm
Our Sale Price: $43.99
|
Click to
enlarge |
WOOD CUTTER M73
Workman cutting wooden block
with circular saw. Finely painted and printed sheet metal. Approximate
Size: 11 x 11 x 7cm
Our Sale Price: $43.99
|
Click to
enlarge |
BLACKSMITH M86
Workman with hammer and anvil.
Finely painted and printed sheet metal. Approximate
Size: 11 x 11 x 7cm
Our Sale Price: $43.99
|
Click to
enlarge |
LUMBERJACKS M87
Watch the two lumberjacks
"saw" the log with a two handled saw. Finely painted and printed sheet
metal. Approximate
Size: 23 x 10 x 12cm
Our Sale Price: $82.99
|
Click to
enlarge |
ORGAN GRINDER M85
Listen to the organ grinder
crank out a melody ( Really plays a tune). Finely painted and printed sheet
metal. Approximate
Size: 11 x 11 x 10 cm
Our Sale Price: $76.99
|
Click to
enlarge |
PUMP AT THE VILLAGE GREEN M88
Watch as the gardener pumps
water into the water trough. ( Pump is fully functional) Finely painted and
printed sheet metal. Approximate
Size: 22 x 10 x 16cm
Our Sale Price: $76.99
|
| back
to top |
|
|
|
|
